Putting up Christmas lights is one of the most fun things to do during the holidays for a lot of people. But turning a house into a holiday wonderland can be unpleasant if you don’t avoid typical mistakes. You may save time, money, and stress by avoiding a few common mistakes. Your holiday display will still be safe and beautiful. Visit our recommended site related our campaign!
The first and most crucial guideline is to put safety first. That old, rickety ladder in the garage might be OK for changing a light bulb, but it’s not safe to spend hours on it when it’s chilly. Buy a strong ladder, and if you can, have someone hold it firm until the job is done. Taking a few extra steps can keep you from slipping and hurting yourself.
Not doing the light test is another mistake. There is nothing more annoying than putting lights across a rooftop and then finding out that half of them are burned out. Before you install your lights, make sure they are plugged in at ground level. Throw away strands with broken sockets or frayed wires. Safety and dependability should come first.
Overloading circuits is another prevalent problem. Even with energy-saving LEDs, plugging up too many strands to one outlet can trip breakers or make things uncomfortably hot. To avoid electrical difficulties, use heavy-duty outdoor extension cables instead of inside ones, and don’t overload any one circuit.
Lastly, don’t forget how important it is to plan your design. If you don’t have a clear plan, you can run out of lights halfway through or end up with additional tangled strands and no place to put them. Before you start, make a rough drawing of your house, measure important parts like the rooflines and windows, and figure out how many strands you’ll need.
Your holiday lighting project will go more smoothly, be safer, and be a lot more fun if you don’t make these blunders. Instead of being angry, you’ll have a festive display that makes your family, neighbors, and everyone else who sees it happy.